Temtop M10 Air Quality Detector Professional Formaldehyde/TVOC/PM2.5 Monitor Air Quality Meter

14 reviews

 SERVICE  Free Standard Shipping in US &  Worldwide Fast Delivery.
 COUPON  Save 5% Off at Check Out with Promo code:  NOV5

In stock

Air Quality Monitor

$139.99 $79.99

This new M10 air quality monitor now tracks PM2.5 particles, as well as HCHO, TVOC, plus AQI info. The detector can meet the requirement of testing formaldehyde and TVOC on various occasions and display the real-time data of them in time to guarantee your health in the environment.

1. Monitor PM2.5, HCHO, TVOC and AQI by professional electrochemical sensor.
2. Run with rechargeable built in high-capacity battery (2200 mAh) for 4-6 hours; More suitable for long real-time monitoring with battery charging at a fixed place while more convenient for movement monitoring without charging
3. Colorful indicator light, 3 years Long lifetime sensors
4. Simple unique cube design, best for home, office and various occasions
5. Cyclic display mode by double click the button

Product Specifications:
PM2.5 Sensor: Laser PM Sensor
Measuring Range(PM2.5): 0~999 ug/m³
Resolution(PM2.5): 1 ug/m³
PM2.5 Sensor Life: 3 years
HCHO Sensor: Electrochemical Sensor
Measuring range: 0~2 mg/m³
Resolution: 0.01 mg/m³
HCHO Sensor Life: 3 years
Measuring range(TVOC): 0~5mg/m³
Resolution(TVOC): 0.01mg/m³
TVOC sensor life: 3 years
Battery capacity: 2200mAh
Battery life: 6 hours on a single charge
Input: DC 5V; 0.5A-1A
Weight: 200g
Dimensions: 82*82*31 mm


Have it, Sweet Dream

PM2.5 are 2.5 micrometers in diameter or smaller, and can only be seen with an electron microscope. Fine particles are produced from all types of combustion, including motor vehicles, power plants, residential wood burning, forest fires, agricultural burning, and some industrial processes.

Have it, Better Work

HCHO is colorless, poisonous, highly water-soluble gas with an obnoxious odor. Used in the manufacture of disinfectants, preservatives, and hundreds of industrial and consumer products such as adhesives, carpeting, decorative paneling, foam insulation, drapery, fiber and particle boards, and permanent press fabrics.

Have it, Good Healthy

TVOC is a grouping of a wide range of organic chemical compounds to simplify reporting when these are present in ambient air or emissions. Many substances, such as natural gas, could be classified as volatile organic compounds (VOCs)

Have it, Drive Safely

For each pollutant an AQI value of 100 generally corresponds to an ambient air concentration that equals the level of the short-term national ambient air quality standard for protection of public health. AQI values at or below 100 are generally thought of as satisfactory. When AQI values are above 100, air quality is unhealthy: at first for certain sensitive groups of people, then for everyone as AQI values get higher.

Health standard index:

Operation Steps:
1. Take out the detector and place it outdoors for more than 6 hours.
2. Turn on the detector.
3. Display
- HCHO concentration is displayed after power on. Press Button and PM2.5 concentration will show.
- Press Button again to display TVOC concentration.
- Press Button again to display AQI.
- Press Button to repeat this operation. Double press the Button to repeat this operation automatically at 3 seconds' display interval. Double press the Button again to exit from cyclic display.
- View indicator color for corresponding status.
- The indicator color indicates air quality after the detector is turned on.

Note: After charging, the device can usually last 4 to 6 hours. Yet due to the design of the device, the battery capacity is limited. For daily household usage, it is suggested to always connect it to the power supply.

It is suggested to calibrate the detector manually after three month use as follows.
1) Turn on the detector and wait for about ten minutes.
2) Use the pin to poke the hidden button until HCHO icon blinks in the screen.
3) Place the detector outdoors for ventilation for ten minutes.
4) HCHO icon does not blink, indication the calibration finishes.

Package Info:
M10 Detector * 1
USB Cable * 1
User Manual * 1



Generally it takes about 24 hours to proceed with the order and 2-5 working days in shipping. We offer you FREE SHIPPING if you chose normal shipment. FYI, we offer expedited or overnight shipping. You can choose it when you are about to check out.


Generally, the products will be shipped by DHL express shipping if you are from another countries. It is safer and faster. It takes about 3~5 working days for you to receive the products you ordered.

Returns & Exchanges

We’re bummed if you're not 100% satisfied with the items you received, and we gladly accept returns within 3 month days of receipt for most items in new condition.

Customer Reviews View on Amazon Write a Review

  out of 5 stars

5 star
4 star
3 star
2 star
1 star

Recently Viewed Products

Customer Reviews View on Amazon Write a Review

  out of 5 stars

5 star
4 star
3 star
2 star
1 star

Customer Reviews View on Amazon Write a Review

  out of 5 stars

5 star
4 star
3 star
2 star
1 star

Customer Reviews View on Amazon Write a Review

  out of 5 stars

5 star
4 star
3 star
2 star
1 star

People who bought this product, also bought