PRODUCTS Kategorien

FREE SHIPPING IN US FREE SHIPPING IN US

Generally, it takes about 3~5 business days for delivery. If you need the product urgently, please contact our customer service for USPS 2nd Day Shipping. No tax charged in US except California and Kentucky. Generally, it takes about 3~5 business days for delivery. If you need the product urgently, please contact our customer service for USPS 2nd Day Shipping. No tax charged in US except California and Kentucky.

Elitech VGW-760 Wireless Vacuum Gauge with Alarm 8 Units Elitech VGW-760 Wireless Vacuum Gauge with Alarm 8 Units

In stock
Features: - Brand new Vacuum Gauge: Used for system leakage testing and discern vacuum pump quality of the evacuation in an HVAC and refrigeration system; accurate measurements from 19,000 Microns ...
$215.99 $171.99
-20%
$171.99

Features:

- Brand new Vacuum Gauge: Used for system leakage testing and discern vacuum pump quality of the evacuation in an HVAC and refrigeration system; accurate measurements from 19,000 Microns (atmosphere) to 0 Micron.
- Free App (iOS and Android): Settable high/low-pressure alarm, you can receive remote notifications when readings move beyond a predetermined value. The data could be recorded and exported in Excel and PDF format.
- Long Transmission Distance: Elitech Pressure Gauge App is connected by wireless Bluetooth technology, up to 1187' in ideal conditions (no obstructions).
- Rubberized water-resistant housing (IP65 Rated); ensure a deep vacuum throughout the entire system and prevent the mist when the refrigerant caused by refrigerant bottle blasting.
- Multiple units:  Easy conversion between 8 measurement units: inHg, Torr, psi, mbar, mTorr, Pa, micron, Kpa.

Specifications
Measuring range: 0-19000 micron
Operating temperature 0°F~140°F(-178°C~60°C)
Resolution: 0-400 1Micron
400-3000 10Micron
3000-10000 100 Micron
10000-19000 250Micron
Wireless transmission distance: 30m
Offline records: 9943 readings
Fitting: 1/4" Male Flare
Accuracy:±10%
Product size: 127*74*37mm
Power supply: 3 AA batteries
Max overpressure: 27.5 bar
Time in use: 180h
Units: inHg, Torr, psi, mbar, mTorr, Pa, micron, kPa

Operation Instruction
1 )Press to turn on the gauge before connecting it to a system. It will take 10 seconds for the gauge to warm up. Then it enters normal display.
2) After power on, the gauge will display "----" if the current pressure goes above its measuring range. Data does not show until the measured pressure is within the range.
Note: Keep the pressure below 27.5 bar, to avoid damage the sensor.
3) Make sure the connection type of the access system matches with the gauge fittings. If not please use the included adapter.
4) Press and release the light button to turn on the backlight. The backlight will be auto off two minutes later. 
5) Press and hold the light button to switch measurement units.
6 ) Press and release the wireless button to enable wireless connection. Press it again to disable wireless connection.
7) Press and hold the wireless button until "REC" appears in the screen to enable record function. Press and hold the wireless button again to disable this function.
8) Press and release the power button to turn off the gauge. Please use special tools to remove it.
Note: Please do not close the vacuum pump before removing the vacuum gauge from the system, or high pressure may occur in the system so that impurities will enter the sensor cavity.

Clean the sensor: 
The vacuum sensor may be contaminated by impurities in use. To ensure its accuracy, please follow the steps as follows:
1) Turn the gauge off and remove batteries
2) Inject acetone or alcohol (>70%) into the vacuum cavity with a dropper or a syringe. Tighten the nut and gently shake the gauge.
3) Loosen the nut and drain the fluid from the cavity. Repeat such operation 3 to 4 times.
4) Evacuate it or place it for 3 hours until the sensor gets dry.

Warning:
1. Please use the gauge in specified environment to avoid error or damage of the sensor.
2. Please do not use chemical solvent or corrosive liquid to clean the gauge.
3. Please do not disassemble the gauge.
4. Remove the batteries if the gauge is not to be used for a long time in case the leakage corrodes the gauge. The batteries included are not rechargeable. please do not charge them.

Please use a special tool to install or disassemble it. Please do not rotate the shell forcefully to avoid damaged.

Package contents:
VGW-760 Wireless vacuum gauge -------------------------------------1
AA alkaline batteries----------------------------------------------------3
User manual-------------------------------------------------------------1
Three-way connection --------------------------------------------------1
Bent adapter-------------------------------------------------------------1

Elitech Digital Press Gauge

 

Features:

- Brand new Vacuum Gauge: Used for system leakage testing and discern vacuum pump quality of the evacuation in an HVAC and refrigeration system; accurate measurements from 19,000 Microns (atmosphere) to 0 Micron.
- Free App (iOS and Android): Settable high/low-pressure alarm, you can receive remote notifications when readings move beyond a predetermined value. The data could be recorded and exported in Excel and PDF format.
- Long Transmission Distance: Elitech Pressure Gauge App is connected by wireless Bluetooth technology, up to 1187' in ideal conditions (no obstructions).
- Rubberized water-resistant housing (IP65 Rated); ensure a deep vacuum throughout the entire system and prevent the mist when the refrigerant caused by refrigerant bottle blasting.
- Multiple units:  Easy conversion between 8 measurement units: inHg, Torr, psi, mbar, mTorr, Pa, micron, Kpa.

Specifications
Measuring range: 0-19000 micron
Operating temperature 0°F~140°F(-178°C~60°C)
Resolution: 0-400 1Micron
400-3000 10Micron
3000-10000 100 Micron
10000-19000 250Micron
Wireless transmission distance: 30m
Offline records: 9943 readings
Fitting: 1/4" Male Flare
Accuracy:±10%
Product size: 127*74*37mm
Power supply: 3 AA batteries
Max overpressure: 27.5 bar
Time in use: 180h
Units: inHg, Torr, psi, mbar, mTorr, Pa, micron, kPa

Operation Instruction
1 )Press to turn on the gauge before connecting it to a system. It will take 10 seconds for the gauge to warm up. Then it enters normal display.
2) After power on, the gauge will display "----" if the current pressure goes above its measuring range. Data does not show until the measured pressure is within the range.
Note: Keep the pressure below 27.5 bar, to avoid damage the sensor.
3) Make sure the connection type of the access system matches with the gauge fittings. If not please use the included adapter.
4) Press and release the light button to turn on the backlight. The backlight will be auto off two minutes later. 
5) Press and hold the light button to switch measurement units.
6 ) Press and release the wireless button to enable wireless connection. Press it again to disable wireless connection.
7) Press and hold the wireless button until "REC" appears in the screen to enable record function. Press and hold the wireless button again to disable this function.
8) Press and release the power button to turn off the gauge. Please use special tools to remove it.
Note: Please do not close the vacuum pump before removing the vacuum gauge from the system, or high pressure may occur in the system so that impurities will enter the sensor cavity.

Clean the sensor: 
The vacuum sensor may be contaminated by impurities in use. To ensure its accuracy, please follow the steps as follows:
1) Turn the gauge off and remove batteries
2) Inject acetone or alcohol (>70%) into the vacuum cavity with a dropper or a syringe. Tighten the nut and gently shake the gauge.
3) Loosen the nut and drain the fluid from the cavity. Repeat such operation 3 to 4 times.
4) Evacuate it or place it for 3 hours until the sensor gets dry.

Warning:
1. Please use the gauge in specified environment to avoid error or damage of the sensor.
2. Please do not use chemical solvent or corrosive liquid to clean the gauge.
3. Please do not disassemble the gauge.
4. Remove the batteries if the gauge is not to be used for a long time in case the leakage corrodes the gauge. The batteries included are not rechargeable. please do not charge them.

Please use a special tool to install or disassemble it. Please do not rotate the shell forcefully to avoid damaged.

Package contents:
VGW-760 Wireless vacuum gauge -------------------------------------1
AA alkaline batteries----------------------------------------------------3
User manual-------------------------------------------------------------1
Three-way connection --------------------------------------------------1
Bent adapter-------------------------------------------------------------1

Elitech Digital Press Gauge

 

Customer Reviews

Based on 5 reviews Write a review

Customer Reviews

4.6 / 5

Based on 7 reviews

5 Stars
57% (4)
4 Stars
43% (3)
3 Stars
0% (0)
2 Stars
0% (0)
1 Star
0% (0)

Write a Review

review_video_thumb
Filter | | | | Previous Page Next Page (% reviewsData.reviews.current_page %)/(% reviewsData.reviews.last_page %)
(% authorFirstLetter(review.author) %) (% review.author %) verified
(% review.title %)
(% review.option1.name %) : (% review.option1.value %) (% review.option2.name %) : (% review.option2.value %) (% review.option3.name %) : (% review.option3.value %)
review_image_thumb
Click to Zoom
review_video_thumb
Click to Zoom
(% review.date_time_str %) Verified Purchase
((% review.thumbs_count %)) Helpful

showing reviews from (% reviewsData.reviews.from %) to (% reviewsData.reviews.to %) Previous Page Next Page

0 Review Posted

Product Questions

(% questionsData.questions.total %) Questions Asked

0 Question

Ask a Question

(% authorFirstLetter(question.author) %) (% question.author %)
Q : (% question.question %) ?
Asked on (% question.created_at %)
A : (% question.answer %)
By (% question.answered_by %) On (% question.answered_at %)

showing questions from (% questionsData.questions.from %) to (% questionsData.questions.to %) Previous Page Next Page

0 Question Asked

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Recently Viewed Products Recently Viewed Products


Customer Reviews View on Amazon Write a Review
 

  out of 5 stars


5 star
 
4 star
 
3 star
 
2 star
 
1 star
 

FREE SHIPPING IN US FREE SHIPPING IN US
Free & Easy Returns Free & Easy Returns
Secure Shopping Secure Shopping
24/7 Technician Support 24/7 Technician Support
You have successfully subscribed!