Free Domestic Shipping.Fast Worldwide Shipment. Support: Tel (+1)408-844-4070; Support@elitechus.com; Sales: Tel (+1)408-898-2866; Sales@elitechus.com
My Cart (0)

Elitech CPU-1G CFCs HCFCs HFCs Refrigerant Freon Gas Leak Detector Halogen Leak Detector HVAC Usage

Product Introduction: The CPU-1G is a newly-developed intelligent halogen leak detector. The advanced microcomputer dealer can manage the detection better, it's...

  • Product Code: CPU-1G
  • Availability: In Stock

Price: $69.99

Product Introduction: 

The CPU-1G is a newly-developed intelligent halogen leak detector. The advanced microcomputer dealer can manage the detection better, it's the most reliable and stable leak detector based on the theory of Negative Corona Discharge, giving great expression to easy operation, stable function and high performance. It is a portable sensitive device designed to pinpoint the location of halogen refrigerant leaks in refrigeration systems. These include automotive air conditioning, refrigerators, freezers, vehicle refrigeration systems and home, office, and industrial cooling/refrigeration systems, where halogen is used as the refrigerant. This device is a necessity in the tool box to technicians who do services in the refrigeration and air conditioning field.


Technical Characteristics: 

Power supply: 2 size"C" Alkaline Batteries

Warm-Up Time: 6 seconds

Application of refrigerant: 

Detect leaks in other systems and storage/recovery containers. It will respond to all halogenated (including Chlorine of Fluorine)refrigerants. This includes but is not limited to

                                                CFCs e.g. R12, R11, R500, R503 etc

                                                HCFCS e.g. R22, R123, R124, R502 etc

                                                HFCS e.g. R134a, R404a, R125 etc

                                                Blends such as Az-50. HP62 MP39 etc

Detect Ethylene Oxide gas leaks in hospital sterilizing equipment (it will detect the halogenated carrier gas)

Detect SF-6 high voltage circuit breakers

Detect most gages that contain chlorine, Fluorine and Bromine(halogen gases) 

Detect cleaning agents used in dry cleaning applications such as perchloroethylene.

Sensitivity: 3g/yr of R-134a(ultimate Sensitivity); 6 g/yr of R-134a(max sensitivity)

Battery Life: 50 hours, under typical intermittent operation

Probe: Flexible gooseneck, 14 inch

Visual and Audible indicators: 

Power & Battery: Tri-color LEd display (according to the glowing sequence of color: red, green, and orange)

Relative Leak Level: 7 levels of increasing LED display

Visual -7 LEDs progressively glow from left to right when halogen level Increases

Audible- Beep-sound, rate change along with the visual LED, increase from its idle rate to a higher frequency when higher levels of halogen are detected


Operating Environment: 

Temperature: 0°C to 52°C

Humidity: 20 to 80% RH, non-condensing

The forward direction air flue supplied by mechanical pump can improve and enhance the detection sensitivity.


Control Switches: 

Power: Switch the detector ON/OFF

Sensitivity: Relatively change the response to halogen level.

Reset: Reset the background halogen level at the tip to"zero", any level higher than this "zero" is considered to be a leak and trigger the alarm.

Muse: Set the buzzer sounds or not during the detection process.

Write a review

Note: HTML is not translated!
    Bad           Good