Free Domestic Shipping.Fast Worldwide Shipment. Support: Tel (+1)408-844-4070; Support@elitechus.com; Sales: Tel (+1)408-898-2866; Sales@elitechus.com
My Cart (0)

Elitech PG-20 Digital Pressure Gauge for Pipelines and Compatible Gases, Vacuum Gauge Range -0.100 ~ 5.000MPa

Product Overview: The gauge can test pressure and temperature, featuring backlight, manual calibration, auto-off, units shift, low battery indicator, etc. With battery...

  • Brand: Elitech
  • Product Code: PG-20
  • Availability: In Stock

Price: $55.99 $50.3910% off

Product Overview: 

The gauge can test pressure and temperature, featuring backlight, manual calibration, auto-off, units shift, low battery indicator, etc. With battery life up to six months, the gauge is applied for monitoring pressure of pipelines and pressure vessels in refrigerant and maintenance.


Specification:

Pressure measuring range: -0.100 ~ 5.000MPa

temperature measuring range: -20°C ~70°C

Operating temperature and humidity: 10°C ~60°C; 35% ~ 85%RH

Resolution: Pressure: 0.001MPa; Temperature 0.1°C

Accuracy: Pressure: ±5%FS (22°C ~ 28°C); Temperature 0.1°C

Battery life: six months

Power supply: 3V CR2450 button cell

Sampling Period: 1.2s

Battery Indicator: displays "LOB" at low battery

Display: 30mm*15mm LCD/green back-light auto-off after 6s

Measurement Units: MPa

Out-of-Range Alarm: pressure: FULL


Warning: 

1, when using the refrigerant, to bring goggles. Refrigerants are harmful to the eyes.

2, when connecting pipes to be extra careful, there may be compressed refrigerant pipe, the pipe end to stay away from the nearby people.


General Operation:

1. On/Off

Press Power button to turn on/off the gauge.

2. Temperature display

In power-on mode, press and release Power button to display temperature.

Press it again to display pressure. It will display current pressureafter 5 seconds of inactivity (this function is optional).

3. Backlight

Press and release ZERO/LIGHT to turn on backlight. It will be auto-off after 6 seconds of inactivity.

4. Zero

Press and hold ZERO/LIGHT for 3 seconds to zero. It will display 8.8.8.8 and then 0.000 after 3 seconds. Press and hold the button again for 3 seconds to display current relative pressure.

5. Auto-Off

Press and hold power button and ZERO/LIGHT until ON appears, indicating the Auto-Off function is enabled. The gauge will be auto-off after 15 minutes of inactivity press and hold the two buttons again until OFF appears the auto-Off function is disabled.



Write a review

Note: HTML is not translated!
    Bad           Good

Tags: Pressure Gauge